Syslog da OLT Huawei

  

1. Configure the IP address of the maintenance network port.

   huawei(config)#interface meth 0
   huawei(config-if-meth0)#ip address 10.10.20.1 255.255.255.0
   huawei(config-if-meth0)#quit

   When the inband management interface is used to report the log, you are not required to configure the IP address of the maintenance network port but ensure that the IP address and subnet mask of the maintenance network port cannot be 0. Otherwise, the host cannot report the log record.
2. Add a log host.

   huawei(config)#loghost add 10.10.10.1 huawei

3. Activate the log host.

   huawei(config)#loghost activate name huawei

4. Run the ping command to check the connectivity between the UA5000 and the log host to ensure that the UA5000 can communicate with the log host in the normal state.
5. Configure the TFTP software of the log host.
1. Enable the Syslog Server function.
6. syslog enable alarm-event
7. syslog output all